Wine Cellar Kit: Our Advice on Choosing a Quality Kit
If you are a diehard wine lover, you’ve probably collected a lot of wine as time went by. Eventually, your collection has outgrown the space you have for it, so what do you do now? Whether you have a wine rack or wine cooler, eventually every serious collector wants a wine cellar. But how in the world do you get one? Should you just put a wine rack in your basement? Do you construct your own? If you have it in your budget, it’s definitely worth it to make your own with the help of a wine cellar kit.
A wine cellar kit has all the parts you’ll need to make your cellar, but the first thing you have to do is decide where you want it. The ideal location should have good ventilation and climate control, and not get much sunlight. These parameters, obviously, usually lead to most people putting their wine cellar in the basement!
Once you have your location picked out, you will need to check out your wine cellar kit to get the partss to frame your wine cellar. For this, you will need normal 2×4 or 2×6 construction methods with ceiling joists. Make sure that you follow the state and local codes for the region you live in as you do this. Next it’s time to install a vapor barrier. Optimally, you want your 6mm plastic sheeting up on the ceiling and outside walls of the room. If you can’t get to your outside walls, however, then go ahead and wrap the ceiling and inside walls. Either way, the goal is to keep excess moisture out and maintain appropriate humidity levels.
Now’s the time for the insulation. When it comes to the insulation in your wine cellar, you want to use rigid foam or blown-in insulation or fiberglass. The outside walls and ceiling will need R-19 insulation, but the inside walls need R-13 insulation. Next, pick a material to put on the walls, such as groove wood paneling, green board, sheetrock, or tung. Many people choose green board because it is entirely designed to be resistant to moisture. If you are more into wood paneling, make sure that you get a wood that is resistant to rotting, such as cedar or red wood.
Next up, putting in the floor. Try to avoid carpet in your wine cellar, as it can get moldy very easily. Go with marble, vinyl, slate, or tile instead. Now you must put in your door, making sure that get a tight seal. To guarantee you get a good seal, you want use door made to be an exterior door and put weather-stripping along all four sides. You also want to make sure that you put down a sweep or threshold along the bottom of the door.
The last step is choosing the right temperature and humidity regulator, and your wine cellar kit can help you with this as well!